AT/ATX Hot-Swappable Redundant Power Supplies (option for DUAL P4 or DUAL AMD MB---please call)

RPD-5300 300w AT/ATX(P4 ready)
RPD-5400 400w AT/ATX(P4 ready)
RAH-300/400w ATX Horizontal Series(P4 ready)


RAH-300/400W

Features:

  • RPD Series is ideal for for
    RAID / AT / ATX Functions (All cable sets included)
  • RAH Series is ideal for Rackmount computers
  • Designed for fault-tolerant applications
  • Hot-Swappable/Hot-Pluggable function conveys a power-defect signal to the system via the PMC-21/22 or FAB-5 card
  • Air convection cooling
  • Fault warning system: resettable audio alarm and power defective signal (TTL, low activity)

RPD 5300/5400

Specifications:

  • Dimensions:
    • RPD-5300/5400 - 9.34" x 7.2" x 6.04" (W x D x H)
    • RAH-300/400 - 14.02" x 7.67" x 3.9" (W x D x H)
  • Input voltage: 90VAC ~ 132VAC/ 180 ~ 260 VAC switchable
  • Input frequency: 47Hz ~ 63Hz
  • Inrush current: 40/80A at 110/220VAC
  • Input current: 3A/1.5A per unit parallel, 6A/3A single
  • Efficiency: typical 60% at full load
  • Reliability: M.T.B.F.: minimum of 100,000 hrs.
  • Over load protection: 130 ~ 150% maximum
  • Over voltage protection: +5V -> 5.5V ~ 7V, 3.3V: 3.8V ~ 4.5V
  • Over current protection: short circuit
  • Hold-up time: minimum of 16ms at full load and normal input voltage
  • Transient response: Output voltage returns in less than 1ms maximum following a 50% load change
  • Operating temperature range: 0 ~ 50°C
  • Humidity range: 10 ~ 90%
  • Storage temperature range: -20 ~ 80°C
  • UL/CSA/TUV approved
Output Chart:

OUTPUT
VOLTAGE
OUTPUT CURRENT
REGULATION
RIPPLE/NOISE
OUTPUT
MIN. [A]
MAX. [A]
LOAD
LINE
+5V
5***/7
30/50*
±5%
±1%
50mV
-5V
0
0.3***/0.5/1*
±10%~±14%
±1%
80***/150mV
+12V
2.5
11/12***
±5~±6%
±1%
100mV
-12V
0
0.5/1*
±10%~±15%
±1%
120***/150mV
+3.3V
0***/1
14***/25/18*
±5%
±1%
50mV
+5VSB**
0
1.5A
±5%
±1%
50mV

*N/N: 300/400w **ATX only ***RPD 5300 ATX only

Return to Redundant Power Supplies Main Page